Instructions for Super-DUO Wrap Bracelets

Your kit has beading wire with magnet clasp, wire guard and crimp already attached so you have a double wire for stringing. You will need chain-nose pliers for flattening the second crimp and cutters for trimming the wire at the end. The wire is stiff enough that you will not need a needle for this project.

Holding two wires together, string on one of the two small glass bead, then two metal heishi. Now separate the wires and put a seed bead on each, then string on a super-DUO two-hole bead with a wire through each hole.

Alternate two seed beads (one on each wire) and DUO’s ending with two seed beads. Let the beaded portion lay flat on your work surface to minimize twisting caused by too much tension.

4-wrap Bracelets: 30 inches of beads will wrap a 7.5-inch wrist four times.

1-wrap Bracelets: String 20 DUOs separated by seed beads before the focal. End with two seed beads and holding the two wires together, string on two heishi, then the focal, then two heishi. Begin the second half with two seed beads, one on each wire. Adjust for size by stringing extra or fewer beads.

Finish with two heishi, a glass bead, a crimp and a wire guard. Attach to the second loop on the magnet clasp. Next, string back through the crimp, the glass bead and the two heishi. This is all done holding the two wires together as one. Do not tighten yet. Leave at least an inch of play between the last beads and the crimp. (There is an extra crimp provided in the kit.)

Separate the magnet clasp and lay the bracelet flat. Slide beads up towards the uncrimped end to release the tension which causes the bracelet to curl and twist. Beads should all be touching with no wire showing between them except at the final end.

Tighten the end wires and flatten the crimp to finish.

All materials for Super-DUO bracelets are available separately at Anita’s Beads. Email Anita at to place an order.