Category Archives: Bead Kits

Bead Kit Mondays

We are happy to announce our new summer activity at Anita’s Beads: Bead Kit Mondays! Beginning on Monday June 4th we will be featuring a new bead kit every Monday. If you purchase the featured bead kit on the day it is presented, a discount of 10% off the regular price will be applied. Anita will show how to make the kit by demonstrations at the bead counter throughout the day.

halorainbow2

The featured kit for Monday June 4th is our popular Halo Rainbow Super-Duo 4-wrap bracelet with an easy magnet closure. Many of you have been waiting for this kit to be available. Come see us on Bead Kit Monday! Monday hours are 10-5.

Dragonfly Earrings

orange2

Below are the instructions for the Dragonfly Earring Kits offered at Anita’s Beads. To complete your kit you will need a “Big Eye” needle, a pair of sharp scissors, and “Hypo-Cement” glue.

The kit includes two pieces of 6# Fireline, Czech dagger beads, Czech 4mm machine cut round beads, size 11/0 seed beads, 4mm soldered jump rings, and earwires.

You will string using a single strand of Fireline. The earring is reinforced by going around the path multiple times. Begin by picking up an 11/0 seed bead, one faceted round (the head), another 11/0 seed bead, two dagger beads, another 11/0 seed bead, four faceted rounds (the tail), and another 11/0 seed bead as shown below.

orange22

Pull your thread through, leaving a 9-inch tail (single strand) of fire line at the head. You will need this piece later.

orange222222

Skipping the seed bead, pass your needle up through the four tail beads. Now add one 11/0 seed bead, two dagger beads, and another 11/0 seed bead. Now pass your needle through the head and the first 11/0 seed bead.

Pick up the soldered jump ring and repeat the path a second time to reinforce the earring. After you go through the jump ring a second time, continue down through the 11/0 seed bead above the head, the head, the left seed bead below the head, the two left wings and the seed bead below the left wings.

Now remove your needle from the main thread and thread the tail onto the needle. Pass the needle through the jump ring, the seed bead above the head, the head, the seed bead to the right, the two right wings, and the seed bead below the two right wings. Remove the needle.

Tighten the threads and tie a double knot. Pass the two ends of the thread down through the top three tail beads and trim with sharp scissors. Lay the dragonfly flat on a piece of scrap paper and glue the knot. Place a drop or two of glue where the four wings come together to keep them from flopping.

After the glue dries, open the loop on an earring hook, slip on the soldered jump ring of your dragonfly, and close the loop. Repeat for second earring.

 

 

Instructions for Super-DUO Wrap Bracelets

Your kit has beading wire with magnet clasp, wire guard and crimp already attached so you have a double wire for stringing. You will need chain-nose pliers for flattening the second crimp and cutters for trimming the wire at the end. The wire is stiff enough that you will not need a needle for this project.

Holding two wires together, string on one of the two small glass bead, then two metal heishi. Now separate the wires and put a seed bead on each, then string on a super-DUO two-hole bead with a wire through each hole.

Alternate two seed beads (one on each wire) and DUO’s ending with two seed beads. Let the beaded portion lay flat on your work surface to minimize twisting caused by too much tension.

4-wrap Bracelets: 30 inches of beads will wrap a 7.5-inch wrist four times.

1-wrap Bracelets: String 20 DUOs separated by seed beads before the focal. End with two seed beads and holding the two wires together, string on two heishi, then the focal, then two heishi. Begin the second half with two seed beads, one on each wire. Adjust for size by stringing extra or fewer beads.

Finish with two heishi, a glass bead, a crimp and a wire guard. Attach to the second loop on the magnet clasp. Next, string back through the crimp, the glass bead and the two heishi. This is all done holding the two wires together as one. Do not tighten yet. Leave at least an inch of play between the last beads and the crimp. (There is an extra crimp provided in the kit.)

Separate the magnet clasp and lay the bracelet flat. Slide beads up towards the uncrimped end to release the tension which causes the bracelet to curl and twist. Beads should all be touching with no wire showing between them except at the final end.

Tighten the end wires and flatten the crimp to finish.

All materials for Super-DUO bracelets are available separately at Anita’s Beads. Email Anita at anitaNH@roadrunner.com to place an order.

Daily Bracelet No. 27

db27

Daily Bracelet No. 27 features Czech glass beads and Japanese seed beads on Antique Brass.

Finished Bracelet – $45.00     Bead Kit – $10.95

Metal components for this project must be purchased separately. Combine your Bead Kit with one of Anita’s Daily Bracelet Metal Kits to make a complete bracelet.

To order, contact Anita by phone 603-522-6529 or email anitaNH@roadrunner.com